AddSecure NGP Advanced Installation Manual

Hide thumbs

page of 60

/ 60
Bookmarks

Quick Links

Download this manual

NGP Advanced and

NGP Advanced Extra

Installation Guide

For a safer and smarter world

Need help?

Do you have a question about the NGP Advanced and is the answer not in the manual?

Questions and answers

Summary of Contents for AddSecure NGP Advanced

Page 1 NGP Advanced and NGP Advanced Extra Installation Guide For a safer and smarter world...
Page 2 Events Personal Data Guide to signal strength Users Disposal Path status Settings Glossary Pin inputs Logout Default outputs Approvals Web portal and Addsecure app 44 Appendix Compliance with the user access Configuration level requirements of EN 50136 44 Pin Learn...
Page 3 Introduction www.addsecure.com NGP Advanced and NGP Advanced Extra...
Page 4 3 outputs, making it suitable connected to the platform the unit uses for connection to most common alarm Figure 1 – NGP Advanced and NGP Advanced Extra unit (not to scale) a poll and response check to determine panels. The unit is supplied already path status.
Page 5 Average Normal Operation (inc relays and dial capture operated) NGP Advanced IP/4G @12V 98mA 185mA NGP Advanced Extra IP/4G @12V 104mA 214mA NGP Advanced IP/4G @24V 45mA 100mA NGP Advanced Extra IP/4G @24V 45mA 100mA www.addsecure.com NGP Advanced and NGP Advanced Extra...
Page 6 / 850(Bd5) / 2600(Bd7) / 900(Bd8) / 800(Bd20) / (Bd8)/1800 (Bd3)/2100 MHz (Bd1), maximum 700(Bd28) / TDD2600(Bd38) / TDD2300(Bd40) / transmit power TDD2500(Bd41)2 / 2100(Bd66). Maximum power transmit +25.7dBM Operating range -10 to +50 degrees Celsius, average 90% non condensing humidity www.addsecure.com NGP Advanced and NGP Advanced Extra...
Page 7 Locate wiring, drugs or alcohol. pipes and services first to avoid Upon commencing work on security accidents. system enclosures and components, ensure the item is securely fixed to www.addsecure.com NGP Advanced and NGP Advanced Extra...
Page 8 Mounting and wiring www.addsecure.com NGP Advanced and NGP Advanced Extra...
Page 9 Ideally the aerial should not unit needs to meet EN50131-1 installer be mounted on a metal surface. The access level 3. aerial should be installed a distance of 20cm or greater away from any user or bystander. www.addsecure.com NGP Advanced and NGP Advanced Extra...
Page 10 Figure 3 – Alarm input allocations. Functions must be agreed with your ARC derives its power. Ensure the power source is sufficient to power all devices connected. See the power requirements in the specification section for more information. www.addsecure.com NGP Advanced and NGP Advanced Extra...
Page 11 Carry out a survey to establish the best location. If necessary, a selection of high gain and extension aerials can be purchased via your ARC. www.addsecure.com NGP Advanced and NGP Advanced Extra...
Page 12 Programming www.addsecure.com NGP Advanced and NGP Advanced Extra...
Page 13 4G/2G 120s received wireless signal strength in dBm is connected to. category. DP2 for NGP Advanced, DP3 for and signal strength indicator bars. Two NGP Advanced Extra. Figure 4 – Time to commission paths after bars or more is the recommended signal unit power up level required.
Page 14 Redcare DP3 Redcare DP3 ] [-103]   Figure 6 – Typical display cycling on a fully commissioned unit with a good signal strength and Pin 4 in the alarm or open state www.addsecure.com NGP Advanced and NGP Advanced Extra...
Page 15 Pin 13, the unit’s display will show the alarm immediately but COMMS Path fail Output 1 C <-> NC 7 minutes of constant alarm condition needs to elapse before transmission. Relay status with path fail in operation www.addsecure.com NGP Advanced and NGP Advanced Extra...
Page 16 80 seconds) acknowledge signal is returned from the ARC. To ensure that the NGP Advanced and NGP Advanced Extra units The output has a minimum operation time of can inform the fire alarm panel of status as per the requirements 1s.
Page 17 Configuration www.addsecure.com www.addsecure.com NGP Advanced and NGP Advanced Extra NGP Advanced and NGP Advanced Extra...
Page 18 Change from dynamic to static IP addressing, and allocate a static IP address/subnet/gateway address. Press & Hold for Pin Learn Notice – Done! www.addsecure.com NGP Advanced and NGP Advanced Extra...
Page 19 The eventually return to the top of the structure of the sub-menu depends on menu. The full main menu options are the menu item. shown in Fig. 7. www.addsecure.com NGP Advanced and NGP Advanced Extra...
Page 20 Main menu display www.addsecure.com NGP Advanced and NGP Advanced Extra...
Page 21 Web Server Subnet Addr Back Inputs EOL Output Type 3 Back Gateway Addr Back Back DNS Addr 1 DNS Addr 2 Tunnel Port Web Passcode Back Figure 7 – Button configuration main menu options www.addsecure.com NGP Advanced and NGP Advanced Extra...
Page 22 The configuration menu can be exited at any time without saving any changes by pressing for 5s. This will take you back to the scrolling status display. Pin Learn Notice – Done! Press and hold www.addsecure.com NGP Advanced and NGP Advanced Extra...
Page 23 for 5s. This Input Sense 4* Input Sense 4* High will take you back to the scrolling status display. Press and hold High (positive applied) or Notice - Low (positive removed). Saved! www.addsecure.com NGP Advanced and NGP Advanced Extra...
Page 24 The configuration menu can be exited at any time without saving any changes by pressing for 5s. This will take you back to the scrolling status display. Press twice EOL 1* Notice – DEOL Saved! Press and hold www.addsecure.com NGP Advanced and NGP Advanced Extra...
Page 25 (default). conjunction with the Latched – allow the FUNC relay, when set to Addsecure app. Keyswitch, to be operated remotely via the app or portal by latching the relay. www.addsecure.com NGP Advanced and NGP Advanced Extra...
Page 26 Press and hold changes in. Notice – Saved! The configuration menu can be exited at any time without saving any changes by pressing for 5s. This will take you back to the scrolling status display. www.addsecure.com NGP Advanced and NGP Advanced Extra...
Page 27 The configuration menu can be exited at any displayed. Use up arrow to switch to Static time without saving any changes by pressing IP addressing. for 5s. This will take you back to the scrolling status display. www.addsecure.com NGP Advanced and NGP Advanced Extra...
Page 28 Press and hold Use enter to step along IP address digits 4-12 255.255.255.15 Notice - Use up and down to change individual digits Saved! Press and hold Enter when finished ETH IP Addr * 192.168.1.56 www.addsecure.com NGP Advanced and NGP Advanced Extra...
Page 29 Press and hold Use enter to step along IP address digits 4-12 Notice - Use up and down to change individual digits Saved! Press and hold Enter when finished ETH GW Addr 192 .168.1.254 www.addsecure.com NGP Advanced and NGP Advanced Extra...
Page 30 10443. The Example – changing the unit to use Port 10443 AddSecure servers are set to accept both ports and so no changes are required other than on the unit’s configuration. Access the configuration menu by holding the Enter...
Page 31 Galaxy Classic 485 H changes in. (Classic 500/504/512 The configuration menu can be exited at any time without saving any changes by (RS485)) pressing for 5s. This will take you back to the scrolling status display. www.addsecure.com NGP Advanced and NGP Advanced Extra...
Page 32 The configuration menu can be exited at any time without saving any changes by pressing for 5s. This Press and hold Press up arrow for five seconds to exit will take you back to the scrolling status display. Notice – Saved! www.addsecure.com NGP Advanced and NGP Advanced Extra...
Page 33 Enter button again, the display will show Pin You can get the username and password from your AddSecure account manager. Learn. Press the down arrow until diagnostics is shown. Press the The unit will now have a static IP address of 192.168.222.222 for the duration that Enter button again to enter diagnostics.
Page 34 5s. This will return you to the sub-menu that you were making changes in. Exit configuration menu at any time without saving any changes by pressing for 5s. This will take you back to the scrolling status display. www.addsecure.com NGP Advanced and NGP Advanced Extra...
Page 35 Web server www.addsecure.com www.addsecure.com NGP Advanced and NGP Advanced Extra NGP Advanced and NGP Advanced Extra...
Page 36 Descriptions below are when directly connecting to the Ethernet port of the unit. The same menu options are available via the web portal or AddSecure installer app. Log in with the AddSecure username = xxxxx, The Webportal displays the license agreement and password = xxxxxxxx...
Page 37 Output 3 (FIRE) can be operated in connected to the platform. Red network operator. the same way when Output 3 (FIRE) is indicates that a path is down. www.addsecure.com NGP Advanced and NGP Advanced Extra...
Page 38 In the event log on the app or on the unit web dot and cut or short. page ** indicates a non-reportable event. If a single * is displayed by an event this indicates no acknowledgement has been received. www.addsecure.com NGP Advanced and NGP Advanced Extra...
Page 39 Use the down button to step to the first sub- contact their Installer. For PIN resets you can use the reset menu option or use the drop down to access the sub- pin function in the Ultrasync portal. menus. www.addsecure.com NGP Advanced and NGP Advanced Extra...
Page 40 IP, Subnet and Gateway addresses. Make your changes and then click the Save button. 23410 – O2 ‘Program Success’ will be displayed. 23415 – Vodafone 23420 – Three 23430 – EE www.addsecure.com NGP Advanced and NGP Advanced Extra...
Page 41 ‘Program Success’ will be In the GPIO sub-menu, by using the dropdown displayed. arrows on each section, you can change any of the pin input status from High (positive removed) to Low (positive removed). www.addsecure.com NGP Advanced and NGP Advanced Extra...
Page 42 In the Keyswitch sub-menu, you can set up a keyswitch In the Name Editor sub-menu, you can add names to the to operate in conjunction with the AddSecure App. Any pin inputs. This will then show up on the customer app pin can be used, but will typically be Pin 4.
Page 43 Click reboot now. You will have to re- connect to the device as rebooting will lose the connection. Try reconnecting after a couple of minutes. To restore the unit to factory settings click Reset now. www.addsecure.com NGP Advanced and NGP Advanced Extra...
Page 44 It is the responsibility of the installer updates available for the device. to communicate with the end-customer You should apply any firmware before changes are made to the updates at that point – either from communicators. www.addsecure.com NGP Advanced and NGP Advanced Extra...
Page 45 Interconnection monitoring www.addsecure.com www.addsecure.com NGP Advanced and NGP Advanced Extra NGP Advanced and NGP Advanced Extra...
Page 46 You will need 1 x 3K3 and 1 x 10K resistors for each pin with DEOL interconnection Resistor Item Code Label Colour Code monitoring. 089446 Red Dot in packet 3.3KΩ 1% 10KΩ 1% 089447 Blue Dot in packet orange, orange, black, brown, brown brown, black, black, red, brown www.addsecure.com NGP Advanced and NGP Advanced Extra...
Page 47 Alarms GPI Short NGP Advanced Above, example Cut on Pin 5. Above, example Short on Pin 8. Figure 8 – Typical fire alarm connections for panel with two inputs and unit with interconnection monitoring www.addsecure.com NGP Advanced and NGP Advanced Extra...
Page 48 Dial Capture pins with a test phone connected and line seized (as if making a phone call) will provide a continuous tone (dialling tone). The Dial Capture pins will also have a voltage on there of 45V. www.addsecure.com NGP Advanced and NGP Advanced Extra...
Page 49 If the unit is fitted less than 5m from the alarm panel then an additional termination resistor is generally not required. Figure 9 (not to scale). The unit does not have a terminating resistor. www.addsecure.com NGP Advanced and NGP Advanced Extra...
Page 50 (NGP so DNS addresses will be required. Advanced or NGP Advanced Extra or Addsecure Platform generated alarms) and alarm panel generated ZONE alarms. www.addsecure.com NGP Advanced and NGP Advanced Extra...
Page 51 NGP Advanced and NGP Advanced Extra...
Page 52 The unit should includes what to do if you are unhappy then be powered down so that it will about how we have handled personal not attempt connection to the network. information. www.addsecure.com NGP Advanced and NGP Advanced Extra...
Page 53 This unit is not intended for use in marine environments or water borne vessels. Addsecure may make changes to features and specifications at any time without prior notification in the interest of ongoing product development and improvement. www.addsecure.com NGP Advanced and NGP Advanced Extra...
Page 54 Serial Identity number – 12 digit unique identity number of a unit F175 Form 175 as issued by BSIA Subscriber Identity Module (sim card) Greenwich Mean Time Transistor Transistor Logic Internet Protocol Transmit Local Area Network www.addsecure.com NGP Advanced and NGP Advanced Extra...
Page 55 6662:2017 at Grade 2/3 (DP2) and environmental class 2. EN 50131-10: 2014 Cert No. 1270g NGP Advanced Extra is suitable for use in systems installed to conform to PD 6662:2017 at Grade 3 (DP3) and environmental class 2. Technical Data: see www.addsecure.com/alarm-signalling/uk/...
Page 56 Alarm transmission and fault warning routing equipment for fire alarm systems. Constancy of performance certificate for Construction Products Regulation. 2831-CPR-X0011 0832-UKCA-CPR-X0002 NGP Advanced and NGP Advanced Extra BT Redcare, British Telecommunications plc 2024. Registered office: 1 Braham Street, London E1 8EE.
Page 57 In respect of: OWASP ASVS and MASVS Secure Digital Applications Mobile Applications (OWASP MASVS Ver 1.3 Level 1): Addsecure Mobile Application Android version 2.18.0 Build 0363 Addsecure Mobile Application iOS version 2.18.0 Build 0463 Web Application (OWASP ASVS 4.0.2 Level 1) The Addsecure Ultrasync Portal Application www.addsecure.com...
Page 58 ‘Police Preferred Specification’. www.addsecure.com NGP Advanced and NGP Advanced Extra...
Page 59 APPENDIX Appendix Example authorisation form For the purposes of on-going maintenance and configuration Company name Authorises Installer company name Remote access to Addsecure Next Generation Supervised Premises Transceiver Serial No. number Installed at: premises address Date Signature www.addsecure.com NGP Advanced and NGP Advanced Extra...

This manual is also suitable for:

Ngp advanced extra