AddSecure NGP Advanced Installation Manual page 25

Outputs
The three relay outputs can be configured as follows:
1. Output type 1 (COMMS):
y BSIA 175 Mode – operates when either path is in
fault but in conjunction with Pin 11 ATS allows the
panel to interrogate the device to determine a single
or dual path fault (default).
y Single path fault – operates when either path is in
fault.
y Dual path fault – operates when both paths are in
fault.
y IP path fault – operates when the IP path is in fault.
www.addsecure.com
MAIN MENU DISPLAY
2. Output type 2 (FUNC):
y Dual path fault – operates when both paths are in
fault (default).
y User – allow the relay to be operated remotely via
the app or portal (default).
y Mobile path fault – operates when the mobile path
is in fault.
y RPS – return path signal operates in conjunction with
Pin 4.
y
Fire NAK – Fire pin not acknowledged. Operates in
conjunction with Pin 1.
y
Keyswitch – Set and unset the alarm system in
conjunction with the
Addsecure app.
25
3. Output type 3 (FIRE):
y User – allow the relay to be operated remotely via
the app or portal.
y Fire ACK – Fire pin acknowledged. Operates in
conjunction with Pin 1 (default).
y Keyswitch – Set and unset the alarm system in
conjunction with the
Addsecure app.
Keyswitch mode:
y Momentary – allow the FUNC relay, when set to
Keyswitch, to be operated remotely via the app or
portal by one pulse of the relay (default).
y Latched – allow the FUNC relay, when set to
Keyswitch, to be operated remotely via the app or
portal by latching the relay.
NGP Advanced and NGP Advanced Extra