Encapsulation: Tunnel
Active Protocol: ESP
Encryption: DES
Authentication: SHA1
Perfect Forward Secrecy (PFS): None
1) Configure the ZyWALL USG's VPN gateway and VPN connection as on the list. Also,
remember to configure the policy route for the VPN traffic routing. Refer to the previous
scenario or user guide to find help on setting the ZyWALL USG VPN.
2) Using a web browser, login SonicWall by entering the LAN IP address of SonicWall in the
URL field. The default username and password is admin/password.
3) Switch to menu Network > Interfaces and configure the WAN/LAN IP address to WAN:
167.35.4.3 LAN: 192.168.2.1/24.
All contents copyright (c) 2007 ZyXEL Communications Corporation.
Phase2
ZyWALL USG 1000 Support Notes
Phase2
Encapsulation: Tunnel
Active Protocol: ESP
Encryption: DES
Authentication: SHA1
Perfect Forward Secrecy (PFS): None
3
42