ZyXEL Communications ZYWALL USG 1000 Support Notes page 177

ZyWALL USG 1000 Support Notes
Step4. Unplug the PC cable from Backup ZyWALL ge1 and plug it back to L2 switch
LAN segment. Connect all the cables from L2 and L3 switches to the Backup ZyWALL as on
the network topology diagram shown on the index page. Login to the Backup ZyWALL via
the management IP and synchronize the configuration from the Master to the Backup.
Switch to ZyWALL > Device HA > Synchronize and enter the Master ZyWALL admin
account password. Input the LAN IP address of the Master ZyWALL in the "Synchronize
from" option and set the auto synchronize interval. Then click the "Apply" button to save the
configuration.
177
All contents copyright (c) 2007 ZyXEL Communications Corporation.