ZyXEL Communications ZYWALL USG 1000 Support Notes page 228

ZyWALL USG 1000 Support Notes
[5] no service
[6] action allow
[7] from Wireless_Zone
[8] to WAN
[9] no log
[10] activate
[11] description allow-employee-access
[12] exit
5. Configure another rule to allow a non-employee access from the source "wireless network"
to "any" in WAN.
6. After this, you will see the results as on the figure below. Click Apply button.
Corresponding CLI commands for your reference
[0] firewall activate
[1] no firewall asymmetrical-route activate
[2] firewall 8
[3] activate
[4] exit
[5] firewall 9
[6] activate
[7] exit
228
All contents copyright (c) 2007 ZyXEL Communications Corporation.