ZyXEL Communications ZYWALL USG 1000 Support Notes page 276

12) Click on the
it is a "nail-up" connection, we can choose Active here; if it is a "dial-on-demand"
connection, we can pick "Passive" here. The "Downstream Bandwidth" and the "Upstream
Bandwidth" here are the values used for reference of the Load Balancing Algorithm.
13) Repeat the above steps until all three PPPoE interfaces are added into this WAN_Trunk
interface. Remove the fixed links on GE2 and/GE3 if you want.
All contents copyright (c) 2007 ZyXEL Communications Corporation.
to pick the right PPPoE interface. Also, for the "Mode" of the Interface, if
ZyWALL USG 1000 Support Notes
276