ZyXEL Communications ZYWALL USG 1000 Support Notes page 295

ZyWALL USG 1000 Support Notes
14) By default, GE2 and GE3 were already in the WAN_Trunk. And GE2 is set to get the IP
automatically from the DHCP Server, thus, the only thing you may need to modify is the
bandwidth value. However, this step is not mandatory.
CLI commands to create a PPPoE account
[0] account pppoe ISP1
[1] user test1@isp1.com
[2] password abcdefg
[3] authentication chap-pap
[4] compression no
[5] idle 0
[6] exit
CLI commands to create a PPPoE interface
[0] interface ppp1
[1] no shutdown
295
All contents copyright (c) 2007 ZyXEL Communications Corporation.