ZyXEL Communications ZYWALL USG 1000 Support Notes page 242

ZyWALL USG 1000 Support Notes
CLI to create this bridge interface:
[0] interface br1
[1] no join ge2
[2] no join ge4
[3] no join ge5
[4] join ge2
[5] join ge4
[6] join ge5
[7] ip address 220.110.7.1 255.255.255.0
[8] ip gateway 220.110.7.13 metric 0
[9] exit
3) Switch to Configuration > Policy > Route > Policy Route, to modify the default rule there.
The default rule is for the Router Mode (NAT Mode). Since we have two different modes
co-existing here, we need to make some adjustments to this rule.
242
All contents copyright (c) 2007 ZyXEL Communications Corporation.