ZyXEL Communications ZYWALL USG 1000 Support Notes page 11

User needs to configure the static IP address and then apply to the VPN Gateway
configuration page. The configuration steps are stated below:
1) Login ZyWALL USG GUI, setup the ge2 interface for internet connection and manually
assign a static IP. The configuration path in ZyWALL USG menu is Configuration >
Network > Interface > Edit > ge2
2) Switch to Configuration > Network > IPSec VPN > VPN Gateway select interface ge2
as My Address and then in Security Gateway Address field set the remote gateway IP to
167.35.4.3. The Local ID Type and content are IP and 210.110.7.1, Peer ID Type and
content are IP and 167.35.4.3.
3) Repeat the step1 & 2 to configure the Remote ZyWALL USG. The Local ID Type &
content and Peer ID Type & content are reverse to the Local ZyWALL USG.
All contents copyright (c) 2007 ZyXEL Communications Corporation.
ZyWALL USG 1000 Support Notes
1
11