ZyXEL Communications ZYWALL USG 1000 Support Notes page 270

ZyWALL USG 1000 Support Notes
To create three PPPoE links and manage them with the Wan Trunk interface, please follow the
configuration steps as stated below:
1) Login ZyWALL USG GUI and go to Configuration > Network > ISP Account. Then click
the "+" to create a new account for a PPPoE connection.
2) Now, on the screen, you can give a name to this profile. Select the protocol as PPPoE.
Please set the Idle timeout to 0 if you do not want this link to be a subject to timeout. All other
parameters including the username and the password should be based on your ISP's
requirements. Finally, click "OK" to add this account.
270
All contents copyright (c) 2007 ZyXEL Communications Corporation.