ZyXEL Communications ZYWALL USG 1000 Support Notes page 147

3. Configuration on ZyWALL 2 Plus
(1). LAN Network Setting
1. Login ZyWALL 2 Plus GUI and go to menu Network > LAN, change the IP address to
192.168.3.1/24 and DHCP IP pool starting address from 192.168.3.33. Then release the
original IP address on your PC and get the new IP address in 192.168.3.0/24 subnet assigned
by DHCP.
(2). WAN Network Setting
1. Switch to GUI menu Network > WAN, change the IP address to 59.124.163.152 with
subnet 255.255.255.224 and gateway 59.124.163.129 in this example. Other setting leaves as
default value.
Reminder: Please remember to configure the public DNS server at GUI menu Advanced >
DNS > System tab, to insert the correct DNS server accordingly at Name Server Record.
(3). Dial Backup Setting
1. Switch to GUI menu Network > WAN > Dial Backup tab
- Enable Dial Backup: enable
- Fill out the login name, password, phone number and dial backup port speed according to
your modem dial up settings.
- Click the Apply button
2. Telnet or login ZyWALL 2 Plus console and switch to menu 24.8 to enable the pingcheck
to detect the WAN connection availability.
- Execute the CLI command: sys rn pingcheck 1
3. Add the CLI to autoexec.net to make it always enabled even after device reboot.
All contents copyright (c) 2007 ZyXEL Communications Corporation.
ZyWALL USG 1000 Support Notes
147