ZyXEL Communications ZYWALL USG 1000 Support Notes page 169

User's pc network connection will disconnect and get the new IP address from ZyWALL USG
after applying the ge1's new setting.
2.2. Configure the interface to correspond Zone
Step1. Switch to ZyWALL > Network > Zone and click the "Edit" icon to modify the
setting.
Step2. The default setting of ZyWALL is having three Zones. User can add more Zones
or modify the Zone's name if they wish. The main purpose of Zone is to add the security
checking between different interfaces. The default interface for LAN zone is binding with ge1,
WAN zone is binding with ge2 and ge3, DMZ zone is binding ge4 and ge5. Thus, we need to
modify the DMZ zone to bind the ge4 only. This is an optional setting that won't affect the
whole application.
Click the "Remove" icon to delete ge5 under the DMZ zone.
All contents copyright (c) 2007 ZyXEL Communications Corporation.
ZyWALL USG 1000 Support Notes
169