ZyXEL Communications ZYWALL USG 1000 Support Notes page 101

Asia Regional Center ZyWALL USG interface and VPN concentrator setting
The VPN configuration parameter for Asia and Europe regional Center ZyWALL USG
Asia Regional Center ZyWALL USG
WAN1:179.25.3.24
WAN2:179.25.133.4
LAN:192.168.10.1/24
Negotiation Mode : Main
Pre-share key: 123456789
Encryption :DES
Authentication :MD5
Key Group :DH1
Encapsulation: Tunnel
Active Protocol: ESP
Encryption: DES
Authentication: SHA1
Perfect Forward Secrecy (PFS): None
Please refer to the application topology to setup the ZyWALL USG interface first. We can
move to next steps only after setting up the interface. We use ge1 as LAN interface and IP
address is 192.168.10.1/255.255.255.0. The ge2 and ge3 are WAN1 and WAN2 interfaces and
IP address are 179.25.3.24/255.255.0.0 and 179.25.133.4/255.255.0.0.
We have to pre-configure some address objects for the later VPN configuration
requirements. The needed address objects list is as follows:
All contents copyright (c) 2007 ZyXEL Communications Corporation.
Phase 1
Phase2
ZyWALL USG 1000 Support Notes
Europe Regional Center ZyWALL USG
WAN1:220.123.113.8
WAN2:220.123.119.9
LAN:192.168.20.1/24
Phase 1
Negotiation Mode : Main
Pre-share key: 123456789
Encryption :DES
Authentication :MD5
Key Group :DH1
Phase2
Encapsulation: Tunnel
Active Protocol: ESP
Encryption: DES
Authentication: SHA1
Perfect Forward Secrecy (PFS): None
101