ZyXEL Communications ZYWALL USG 1000 Support Notes page 290

ZyWALL USG 1000 Support Notes
4) Now, all the PPPoE accounts are created. Our next task will be creating the PPPoE
Interfaces. Go to Configuration > Network > Interface > PPPoE/PPTP. Then click the "+"
to create a new account.
5) Check the box "Enable" to enable this PPPoE interface, then give the interface a name. The
name has to be in the format of ppp(0~11). Choose if you want this PPPoE connection to be a
forever link up connection or a Dial-on-Demand connection. According to our scenario, all the
PPPoE connections are coming from GE2. Thus, we pick GE2 as our base interface. Pick the
account profile that you want to apply for this PPPoE interface; all other remaining settings
are either optional or depending on the requirements of your ISP.
290
All contents copyright (c) 2007 ZyXEL Communications Corporation.