ZyXEL Communications ZYWALL USG 1000 Support Notes page 170

Step3. Check the interface summary page to confirm the settings.
2.3. Setup the routing
The routing source and destination address options will auto-grant from address object. The
policy or static route can't be correctly setup until the corresponding address object is not
configured.
Step1. Switch to ZyWALL > Objects > Address > Address and you will find there is one
default LAN_SUBNET address object.
Change the address from 192.168.1.0 to 192.168.10.0 to configure the new LAN IP. The
All contents copyright (c) 2007 ZyXEL Communications Corporation.
ZyWALL USG 1000 Support Notes
170