ZyXEL Communications ZYWALL USG 1000 Support Notes page 185

ZyWALL USG 1000 Support Notes
Switch to ZyWALL > Network > Routing > Policy Route and add the policy route for the
VPN traffic to LAN and DMZ.
Step6. Connect the PC to ZyWALL 2 Plus and set the VPN settings.
In this step, we have to configure two VPN policies for remote ZyWALL USG LAN subnet
and DMZ subnet. Login ZyWALL 2 Plus and switch to the VPN configuration page.
Fill in the WAN IP in My Address field and put remote USG WAN1 and WAN2 IP as Primary
and Redundant remote Gateways. Activate the "Fail back to Primary Remote Gateway when
possible" option and set the checking interval.
Setup the DNS domain name "ZyWALL 2"and "ZyWALL USG" as Local and Peer ID type.
Click Apply to save the configuration.
185
All contents copyright (c) 2007 ZyXEL Communications Corporation.