ZyXEL Communications ZYWALL USG 1000 Support Notes page 289

ZyWALL USG 1000 Support Notes
2 On this screen, you can set a name for this profile. Select the protocol as PPPoE. Please set
the Idle timeout to 0 if you do not want this link to be a subject to timeout. All other
parameters including the username and password should be based on your ISP's requirements.
Finally click "OK" to add this account.
3) Since we have three PPPoE links in our scenario, you will need two additional PPPoE
accounts here as well. Repeat the above steps to create all the other accounts. Your final
PPPoE account summary screen should look like this.
289
All contents copyright (c) 2007 ZyXEL Communications Corporation.