ZyXEL Communications ZYWALL USG 1000 Support Notes page 273

6) Repeat the above steps to create the other two PPPoE Interfaces. Then you should get a
screen looking like this. Also, in a case you want to connect your PPPoE interface
manually, click on
7) Now all the PPPoE interfaces are created. And all of them are desired to be added to the
WAN Zone as well. Go to Configuration > Network > Zone to click on the modify icon
of the WAN Zone.
All contents copyright (c) 2007 ZyXEL Communications Corporation.
as demonstrated below.
ZyWALL USG 1000 Support Notes
273