ZyWALL USG 1000 Support Notes
Corresponding CLI commands for your reference
[0] zone Wireless_Zone
[1] no block
[2] interface vlan10
[3] exit
Step3. Enable Force Authentication Page Redirect
1. Go to menu Object > Address, and create a subnet for wireless network. Name it 'Wireless'
for further configuration use.
2. Go to menu User/Group > Setting > Force User Authentication Policy, click '+' to force
all the packets from wireless network to be redirected to the authentication page.
221
All contents copyright (c) 2007 ZyXEL Communications Corporation.