ZyXEL Communications ZYWALL USG 1000 Support Notes page 155

ZyWALL USG 1000 Support Notes
(2). Create Two Routing Domains
Switch to menu Basic Setting > IP Setup, create two IP routing domain using menu Basic
setting > IP Setup as shown below. Then click the Add button.
(3). Create One Static Route
Add the static route for the packets returning from the 192.168.1.0 network to the
192.168.31.0 network if the traffic is from 192.168.3.0 through the secondary VPN gateway,
ZyWALL USG-B.
1. Enter the ES4024A's GUI, go to menu Routing Protocol > Static Routing.
2. Define that the traffic that wants to go to the 192.168.31.0/24 network will be routed by
the gateway, 192.168.2.1. The configuration is as shown below.
155
All contents copyright (c) 2007 ZyXEL Communications Corporation.