ZyXEL Communications ZYWALL USG 1000 Support Notes page 115

Encapsulation: Tunnel
Active Protocol: ESP
Encryption: DES
Authentication: SHA1
Perfect Forward Secrecy (PFS): None
To achieve this, we have to complete the following tasks:
On ZyWALL USG, create the object 'Address' for remote network ranging from 0.0.0.0
to 255.255.255.255
On ZyWALL USG, configure VPN gateway and connection settings
On ZyWALL70, configure the corresponding VPN settings
See the following step-by-step configuration.
ZyWALL USG A configuration
1) Login ZyWALL USG A GUI and go to Configuration > Network > Interface > Ethernet
and configure the IP setting as shown in the topology.
2) Go to Configuration > Object >Address to create an address object for all the incoming
traffic.
All contents copyright (c) 2007 ZyXEL Communications Corporation.
Phase2
ZyWALL USG 1000 Support Notes
Phase2
Encapsulation: Tunnel
Active Protocol: ESP
Encryption: DES
Authentication: SHA1
Perfect Forward Secrecy (PFS): None
115