ZyWALL USG 1000 Support Notes
Note:
In ZyWALL USG-A, we use "Source NAT" to change the VPN traffic from 192.168.3.0
network which will go to 192.168.1.0 network to 192.168.30.0 network. And we will also
configure ZyWALL USG-B to change the VPN traffic from 192.168.3.0 network which will
go to 192.168.2.0 network to 192.168.31.0 network later.
CLI commands for reference
133
All contents copyright (c) 2007 ZyXEL Communications Corporation.