NSD ABSOCODER NCW-3DHPNL8 Specifications & Instruction Manual page 49

(4) Set the data tag address.
On "Operand identifier", "I" indicates the input of the I/O data, and "O" is the output.
For more details, refer to the "9-8-1. I/O data format".
For each address of the I/O data, check I Address and Q Address in "Device view->Device overview".
(5) Create a data tag for either axis-1 or axis-2 by repeating the procedure (2) to (4).
Items indicated on the following data tags are the same as items written on "9-8-1. I/O data format".
(4)
(4)
42
(4)
(4)