Chapter 11 User
11.2 User Summary
The User screen provides a summary of all user accounts. To access this screen click
Configuration > Object > User.
Figure 57 Configuration > Object > User
The following table describes the labels in this screen.
Table 48 Configuration > Object > User
LABEL
Add
Edit
Remove
Object
References
#
User Name
User Type
Description
11.2.1 Add/Edit User
The User Add/Edit screen allows you to create a new user account or edit an existing one.
11.2.1.1 Rules for User Names
Enter a user name from 1 to 31 characters.
The user name can only contain the following characters:
• Alphanumeric A-z 0-9 (there is no unicode support)
128
DESCRIPTION
Click this to create a new entry.
Double-click an entry or select it and click Edit to open a screen where you can
modify the entry's settings.
To remove an entry, select it and click Remove. The device confirms you want to
remove it before doing so.
Select an entry and click Object References to open a screen that shows which
settings use the entry.
This field is a sequential value, and it is not associated with a specific user.
This field displays the user name of each user.
This field displays type of user this account was configured as.
•
admin - this user can look at and change the configuration of the device
•
limited-admin - this user can look at the configuration of the device but not
to change it
•
user - this user has access to the device's services but cannot look at the
configuration
This field displays the description for each user.
NWA3000-N Series User's Guide