User Summary; Add/Edit User - ZyXEL Communications NWA1123 Series User Manual

9.2 User Summary

The User screen provides a summary of all user accounts. To access this screen click Configuration >
Object > User.
Figure 53 Configuration > Object > User
The following table describes the labels in this screen.
Table 34 Configuration > Object > User
LABEL
Add
Edit
Remove
Object Reference
#
User Name
User Type
Description

9.2.1 Add/Edit User

The User Add/Edit screen allows you to create a new user account or edit an existing one.
9.2.1.1 Rules for User Names
Enter a user name from 1 to 31 characters.
The user name can only contain the following characters:
• Alphanumeric A-z 0-9 (there is no unicode support)
• _ [underscores]
• - [dashes]
Chapter 9 User
DESCRIPTION
Click this to create a new entry.
Double-click an entry or select it and click Edit to open a screen where you can modify the
entry's settings.
To remove an entry, select it and click Remove. The NWA1123 confirms you want to remove it
before doing so.
Select an entry and click Object Reference to open a screen that shows which settings use
the entry.
This field is a sequential value, and it is not associated with a specific user.
This field displays the user name of each user.
This field displays type of user this account was configured as.
• admin - this user can look at and change the configuration of the NWA1123
• limited-admin - this user can look at the configuration of the NWA1123 but not to change
it
• user - this user has access to the NWA1123's services but cannot look at the configuration
This field displays the description for each user.
NWA1123 Series User's Guide
82