Table 80 Configuration > System > Auth. Server (continued)
LABEL
Apply
Reset
15.10.2 Adding or Editing a Trusted AP Profile
This screen allows you to add or edit an internal RADIUS server trusted AP profile. To access this
screen, click the Configuration > System > Auth. Server screen's Add button or select a trusted
AP profile from the list and click the Edit button.
Figure 102 Configuration > System > Auth. Server > Add
The following table describes the labels in this screen.
Table 81 Configuration > System > Auth. Server
LABEL
Activate
Profile Name
IP Address
Netmask
Secret
Description
OK
Cancel
NWA3000-N Series User's Guide
DESCRIPTION
Click OK to save your changes back to the device.
Click Reset to start configuring this screen afresh.
DESCRIPTION
Select this to turn on this trusted AP profile.
Type a name for the trusted AP profile.
Type the IP address of the trusted AP in dotted decimal notation.
Type the subnet mask of the trusted AP in dotted decimal notation. The subnet
mask indicates what part of the IP address is the same for all computers in the
network.
Enter a password (up to 31 alphanumeric characters, no spaces) as the key for
encrypting communications between the device and this entry's AP. The key is
not sent over the network. This key must be the same on the device and the AP.
Both the device's IP address and this shared secret must also be configured in
the "external RADIUS" server fields of the trusted AP.
Type some information to help identify the trusted AP.
Click OK to save your changes back to the device.
Click Cancel to exit this screen without saving your changes.
Chapter 15 System
203