ZyXEL Communications NWA3000-N User Manual page 265

Table 103 Certificate Path Verification Failure Reason Codes (continued)
CODE DESCRIPTION
CRL decoding failed.
20
CRL is not currently valid, but in the future.
21
CRL contains duplicate serial numbers.
22
Time interval is not continuous.
23
Time information not available.
24
Database method failed due to timeout.
25
Database method failed.
26
Path was not verified.
27
Maximum path length reached.
28
Table 104 WLAN Logs
LOG MESSAGE
Wlan %s is enabled.
Wlan %s is disabled.
Wlan %s has been
configured.
Interface %s has been
configured.
Interface %s has been
deleted.
Create interface %s
has failed. Wlan
device does not exist.
System internal error.
No 802.1X or WPA
enabled!
System internal error.
Error configuring WPA
state!
System internal error.
Error enabling WPA/
802.1X!
Station has
associated. Interface:
%s, MAC: %s.
WPA or WPA2 enterprise
EAP timeout.
Interface: %s, MAC:
%s.
NWA3000-N Series User's Guide
DESCRIPTION
The WLAN (IEEE 802.11 b and or g) feature has been turned on. %s
is the slot number where the WLAN card is or can be installed.
The WLAN (IEEE 802.11 b and or g) feature has been turned off. %s
is the slot number where the WLAN card is or can be installed.
The WLAN (IEEE 802.11 b and or g) feature's configuration has been
changed. %s is the slot number where the WLAN card is or can be
installed.
The configuration of the specified WLAN interface (%s) has been
changed.
The specified WLAN interface (%s) has been removed.
The wireless device failed to create the specified WLAN interface
(%s). Remove the wireless device and reinstall it.
IEEE 802.1x or WPA is not enabled.
The device was not able to configure the wireless device to use WPA.
Remove the wireless device and reinstall it.
The device was not able to enable WPA/IEEE 802.1X.
A wireless client with the specified MAC address (second %s)
associated with the specified WLAN interface (first %s).
There was an EAP timeout for a wireless client connected to the
specified WLAN interface (first %s). The MAC address of the wireless
client is listed (second %s).
Appendix A Log Descriptions
265