Chapter 15 System
To get the device date and time from a time server:
Click System > Date/Time.
1
Select Get from Time Server under Time and Date Setup.
2
Under Time Zone Setup, select your Time Zone from the list.
3
Under Time and Date Setup, enter a Time Server Address.
4
Click Apply.
5
15.4 Console Speed
This section shows you how to set the console port speed when you connect to the device via the
console port using a terminal emulation program. See
settings.
Click Configuration > System > Console Speed to open this screen.
Figure 82 Configuration > System > Console Speed
The following table describes the labels in this screen.
Table 72 Configuration > System > Console Speed
LABEL
Console Port Speed
Apply
Reset
180
DESCRIPTION
Use the drop-down list box to change the speed of the console port. Your
device supports 9600, 19200, 38400, 57600, and 115200 bps (default) for the
console port.
The Console Port Speed applies to a console port connection using terminal
emulation software and NOT the Console in the device Web Configurator
Status screen.
Click Apply to save your changes back to the device.
Click Reset to return the screen to its last-saved settings.
Table 1 on page 23
for default console port
NWA3000-N Series User's Guide