ZyXEL Communications NWA3000-N User Manual page 262

Appendix A Log Descriptions
Table 102 Device HA Logs
LOG MESSAGE
Device HA VRRP Group
%s has been added.
Device HA VRRP group
%s has been modified.
Device HA VRRP group
%s has been deleted.
Device HA VRRP
interface %s for VRRP
Group %s has changed.
Device HA syncing from
%s starts.
%s has no file to
sync, Skip syncing it
for %s.
Master configuration
is the same with
Backup. Skip updating
it.
%s file not existed,
Skip syncing it for %s
Master firmware
version can not be
recognized. Stop
syncing from Master.
Device HA Sync has
failed when syncing %s
for %s due to bad
\"Sync Password\".
Device HA Sync has
failed when syncing %s
for %s due to bad
\"Sync From\" or
\"Sync Port\".
Device HA Sync has
failed when syncing %s
for %s.
Sync Failed: Cannot
connect to Master when
syncing %s for %s.
262
DESCRIPTION
An VRRP group has been created, %s: the name of VRRP group.
An VRRP group has been modified, %s: the name of VRRP group.
An VRRP group has been deleted, %s: the name of VRRP group.
Configuration of an interface that belonged to a VRRP group has been
changed, 1st %s: VRRP interface name, 2ed %s: %s: the name of
VRRP group.
Device HA Syncing from Master starts when user click "Sync Now"
using Auto Sync, %s: The IP of FQDN of Master.
There is no file to be synchronized from the Master when syncing a
object (AV/AS/IDP/Certificate/System Configuration), But in fact,
there should be something in the Master for the device to synchronize
with, 1st %s: The syncing object, 2ed %s: The feature name for the
syncing object.
The System Startup configuration file synchronized from the Master is
the same with the one in the Backup, so the configuration does not
have to be updated.
There is no file to be synchronized from the Master when syncing a
object (AV/AS/IDP/Certificate/System Configuration), But in fact,
there should be something in the Master for the device to synchronize
with, 1st %s: The syncing object, 2ed %s: The feature name for the
syncing object.
Synchronizing stopped because the firmware version file was not
found in the Master. A Backup device only synchronizes from the
Master if the firmware versions are the same between the Master and
the Backup.
The synchronization password was incorrect when attempting to
synchronize a certain object (AV/AS/IDP/Certificate/System
Configuration).
1st %s: The object to be synchronized, 2ed %s: The feature name
for the object to be synchronized.
The Sync From IP address or Sync Port may be incorrect when
synchronizing a certain object (AV/AS/IDP/Certificate/System
Configuration).
Synchronization failed when synchronizing a certain object (AV/AS/
IDP/Certificate/System Configuration) due to an unknown reason, 1st
%s: The object to be synchronized, 2ed %s: The feature name for
the object to be synchronized.
Synchronization failed because the Backup could not connect to the
Master. The object to be synchronized, 2ed %s: The feature name for
the object to be synchronized.
NWA3000-N Series User's Guide