ZyXEL Communications NWA3000-N User Manual page 146

Chapter 12 AP Profile
The following table describes the labels in this screen.
Table 57 SSID > Security Profile > Add/Edit Security Profile
LABEL
Profile Name
Security Mode
802.1X
Radius Server Type
Primary /
Secondary Radius
Server Activate
Radius Server
IP Address
Radius Server
Port
Radius Server
Secret
Primary /
Secondary
Accounting Server
Activate
Accounting
Server IP
Address
Accounting
Server Port
Accounting
Share Secret
Reauthentication
Timer
Idle Timeout
Authentication Type
146
DESCRIPTION
Enter up to 31 alphanumeric characters for the profile name. This name is only
visible in the Web Configurator and is only for management purposes. Spaces
and underscores are allowed.
Select a security mode from the list: wep, wpa, wpa2, or wpa2-mix.
Select this to enable 802.1x secure authentication.
Select internal to use the device's internal authentication database, or external
to use an external RADIUS server for authentication.
Select this to have the device use the specified RADIUS server.
Enter the IP address of the RADIUS server to be used for authentication.
Enter the port number of the RADIUS server to be used for authentication.
Enter the shared secret password of the RADIUS server to be used for
authentication.
Select the check box to enable user accounting through an external
authentication server.
Enter the IP address of the external accounting server in dotted decimal
notation.
Enter the port number of the external accounting server. The default port
number is 1813. You need not change this value unless your network
administrator instructs you to do so with additional information.
Enter a password (up to 128 alphanumeric characters) as the key to be shared
between the external accounting server and the device. The key must be the
same on the external accounting server and your device. The key is not sent
over the network.
Enter the interval (in seconds) between authentication requests. Enter a 0 for
unlimited requests.
Enter the idle interval (in seconds) that a client can be idle before
authentication is discontinued.
Select a WEP authentication method. Choices are Open or Share key. Share
key is only available if you are not using 802.1x.
NWA3000-N Series User's Guide