ZyXEL Communications NWA3000-N User Manual page 263

Table 102 Device HA Logs (continued)
LOG MESSAGE
Backup firmware
version can not be
recognized. Stop
syncing from Master.
Sync failed: Remote
Firmware Version
Unknown
Master firmware
version should be the
same with Backup.
Update %s for %s has
failed.
Update %s for %s has
failed: %s.
Device HA has skipped
syncing %s since %s is
%s.
Device HA
authentication type
for VRRP group %s
maybe wrong.
Device HA
authenticaton string
of text for VRRP group
%s maybe wrong.
Device HA
authentication string
of AH for VRRP group
%s maybe wrong.
Retrying to update %s
for %s. Retry: %d.
Recovring to Backup
original state for %s
has failed.
Recovering to Backup
original state for %s
has succeeded.
One of VRRP groups has
became avtive. Device
HA Sync has aborted
from Master %s.
NWA3000-N Series User's Guide
DESCRIPTION
The firmware version on the Backup cannot be resolved to check if it
is the same as on the Master. A Backup device only synchronizes from
the Master if the Master and the Backup have the same firmware
versions.
The firmware version on the Master cannot be resolved to check if it
is the same as on the Master. A Backup device only synchronizes
from the Master if the Master and the Backup have the same
firmware versions.
The Backup and Master have different firmware versions. A Backup
device only synchronizes from the Master if the Master and the
Backup have the same firmware versions.
Updating a certain object failed when updating (AS/AV/IDP/
Certificate/System Configuration). 1st %s: The object to be
synchronized, 2ed %s: The feature name for the object to be
synchronized.
Updating a certain object failed when updating (AS/AV/IDP/
Certificate/System Configuration) due to some reason. 1st %s: The
object to be synchronized, 2ed %s: The feature name for the object
to be synchronized.
A certain service has no license or the license is expired, so it was not
synchronized from the Master. 1st %s: The object to be
synchronized, 2ed %s: The feature name for the object to be
synchronized, 3rd %s: unlicensed or license expired.
A VRRP group's Authentication Type (Md5 or IPSec AH) configuration
may not match between the Backup and the Master. %s: The name of
the VRRP group.
A VRRP group's Simple String (Md5) configuration may not match
between the Backup and the Master. %s: The name of the VRRP
group.
A VRRP group's AH String (IPSec AH) configuration may not match
between the Backup and the Master. %s: The name of the VRRP
group.
An update failed. Retrying to update the failed object again. 1st %s:
The object to be synchronized, 2ed %s: The feature name for the
object to be synchronized, %d: the retry count.
An update failed. The device will try to recover the failed update
feature to the original state before Device HA synchronizes the
specified object.
Recovery succeeded when an update for the specified object failed.
%s: IP or FQDN of Master
Appendix A Log Descriptions
263