ZyXEL Communications NWA3000-N User Manual page 261

Table 101 System Logs (continued)
LOG MESSAGE
The request IP is: %s,
sent from %s
Received ARP response
NOT for the request IP
address
Receive an ARP
response from the
client issuing the
DHCP request
Receive an ARP
response from an
unknown client
In total, received %d
arp response packets
for the requested IP
address
Clear arp cache
successfully.
Client MAC address is
not an Ethernet
address
DHCP request received
via interface
%s (%s:%s), src_mac:
%s with requested IP:
%s
IP confliction is
detected. Send back
DHCP-NAK.
Clear ARP cache done
NTP update successful,
current time is %s
NTP update failed
Device is rebooted by
administrator!
Collect Diagnostic
Information has failed
- Server did not
respond.
Collect Diagnostic
Infomation has
succeeded.
NWA3000-N Series User's Guide
DESCRIPTION
The device accepted a request.
The device received an ARP response that is NOT for the requested IP
address.
The device received an ARP response from the client issuing the
DHCP request.
The device received an ARP response from an unknown client.
The device received the specified total number of ARP response
packets for the requested IP address.
The ARP cache was cleared successfully.
A client MAC address is not an Ethernet address.
The device received a DHCP request through the specified interface.
IP conflict was detected. Send back DHCP-NAK.
Clear ARP cache done.
The device successfully synchronized with a NTP time server .
%s is the date and time.
The device was not able to synchronize with the NTP time server
successfully.
An administrator restarted the device.
There was an error and the diagnostics were not completed.
The diagnostics scripts were executed successfully.
Appendix A Log Descriptions
261