My Certificates - ZyXEL Communications NWA3000-N User Manual

Chapter 14 Certificates

14.2 My Certificates

Click Configuration > Object > Certificate > My Certificates to open this screen. This is the
device's summary list of certificates and certification requests.
Figure 72 Configuration > Object > Certificate > My Certificates
The following table describes the labels in this screen.
Table 62 Configuration > Object > Certificate > My Certificates
LABEL
PKI Storage
Space in Use
Add
Edit
Remove
Object References You cannot delete certificates that any of the device's features are configured to
#
Name
160
DESCRIPTION
This bar displays the percentage of the device's PKI storage space that is
currently in use. When the storage space is almost full, you should consider
deleting expired or unnecessary certificates before adding more certificates.
Click this to go to the screen where you can have the device generate a
certificate or a certification request.
Double-click an entry or select it and click Edit to open a screen with an in-depth
list of information about the certificate.
The device keeps all of your certificates unless you specifically delete them.
Uploading a new firmware or default configuration file does not delete your
certificates. To remove an entry, select it and click Remove. The device confirms
you want to remove it before doing so. Subsequent certificates move up by one
when you take this action.
use. Select an entry and click Object References to open a screen that shows
which settings use the entry.
This field displays the certificate index number. The certificates are listed in
alphabetical order.
This field displays the name used to identify this certificate. It is recommended
that you give each certificate a unique name.
NWA3000-N Series User's Guide