ZyXEL Communications NWA3000-N User Manual page 234

Chapter 18 Diagnostics
Note: New capture files overwrite existing files of the same name. Change the File Suffix
field's setting to avoid this.
Figure 116 Maintenance > Diagnostics > Wireless Frame Capture > Capture
The following table describes the labels in this screen.
Table 94 Maintenance > Diagnostics > Wireless Frame Capture > Capture
LABEL
AP Operating Mode
Wireless Radio 1
operating mode
Please configure at
least one radio to
MON mode.
MON Mode APs
Configure AP to
MON Mode
Available MON
Mode APs
Capture MON Mode
APs
Misc Setting
File Size
234
DESCRIPTION
This section appears when the device is set to the standalone AP mode.
This field shows whether the radio is set to function as an AP or a monitor.
Click this to go the Configuration > Wireless > AP Management
screen, where you can set a radio to monitor mode.
This section appears when the device is set to the controller mode.
Click this to go the Configuration > Wireless > AP Management
screen, where you can set one or more APs to monitor mode.
This column displays which APs on your wireless network are currently
configured for monitor mode.
Use the arrow buttons to move APs off this list and onto the Captured
MON Mode APs list.
This column displays the monitor-mode configured APs selected to for
wireless frame capture.
Specify a maximum size limit in kilobytes for the total combined size of all
the capture files on the device, including any existing capture files and any
new capture files you generate.
Note: If you have existing capture files you may need to set this size larger or
delete existing capture files.
The valid range is 1 to 50000. The device stops the capture and generates
the capture file when either the file reaches this size or the time period
specified in the Duration field expires.
NWA3000-N Series User's Guide