8.2 User Summary
The User screen provides a summary of all user accounts. To access this screen click Configuration >
Object > User.
Figure 55 Configuration > Object > User
The following table describes the labels in this screen.
Table 39 Configuration > Object > User
LABEL
Add
Edit
Remove
Object Reference
#
User Name
User Type
Description
8.2.1 Add/Edit User
The User Add/Edit screen allows you to create a new user account or edit an existing one.
8.2.1.1 Rules for User Names
Enter a user name from 1 to 31 characters.
The user name can only contain the following characters:
Chapter 8 User
DESCRIPTION
Click this to create a new entry.
Double-click an entry or select it and click Edit to open a screen where you can modify the
entry's settings.
To remove an entry, select it and click Remove. The NWA/WAC confirms you want to remove
it before doing so.
Select an entry and click Object Reference to open a screen that shows which settings use
the entry.
This field is a sequential value, and it is not associated with a specific user.
This field displays the user name of each user.
This field displays type of user this account was configured as.
•
admin - this user can look at and change the configuration of the NWA/WAC
•
limited-admin - this user can look at the configuration of the NWA/WAC but not to
change it
•
user - this user has access to the NWA/WAC's services but cannot look at the
configuration
This field displays the description for each user.
NWA / WAC Series User's Guide
89