Configuring Www Service Control - ZyXEL Communications NWA3000-N User Manual

Chapter 15 System
HTTPS client only should authenticate itself when the HTTPS server requires it to do so (select
Authenticate Client Certificates in the WWW screen). Authenticate Client Certificates is
optional and if selected means the HTTPS client must send the device a certificate. You must apply
for a certificate for the browser from a CA that is a trusted CA on the device.
Please refer to the following figure.
HTTPS connection requests from an SSL-aware web browser go to port 443 (by default) on the
1
device's web server.
HTTP connection requests from a web browser go to port 80 (by default) on the device's web server.
2
Figure 84 HTTP/HTTPS Implementation
Note: If you disable HTTP in the WWW screen, then the device blocks all HTTP
connection attempts.

15.5.4 Configuring WWW Service Control

Click Configuration > System > WWW to open the WWW screen. Use this screen to specify
HTTP or HTTPS settings.
Figure 85 Configuration > System > WWW > Service Control
182
NWA3000-N Series User's Guide