Account Management; Endpoints Management - Polycom RSS 2000 User Manual

Account Management

You can set endpoint properties, user properties and user groups by clicking Account Management in the
function tree on the left side of the web page.

Endpoints Management

On the Endpoint Management page, you can perform operations including adding endpoints, modifying
endpoint properties and deleting endpoints.
Add Endpoints
Click the New button on the Endpoint Management page to go to the Add Endpoints page, as shown in Fig. 4-24.
On the Add Endpoints page, you can set names, IP addresses, E.164 numbers and H.323 alias of new endpoints,
and enable or disable speed recording for these endpoints.
Name: You can type in any characters, with a length limit of 32 characters.
IP Address: You can only input numerals 0-255 and dots in the format of 'xxxx.xxxx.xxxx.xxxx'.
E.164 Number: You can only input numerals, with a length limit of 16 characters.
H.323 Alias: You can type in any characters, with a length limit of 16 characters.
Enable Speed Recording: When selected, this option allows automatic start of recording upon
connection if recording resource is available, without menu operations needed.
Fig. 4-24 Add Endpoints
Polycom RSS 2000 User's Guide
41