Stop Recording - Polycom RSS 2000 User Manual

Polycom RSS 2000 User's Guide
Figure 2-13 Continue Recording
In this case, when you play the generated archive after the recording is completed, you will find that the part of
archive played after the pause and before the resumption has not been recorded.

Stop Recording

Use the endpoint controller to select Stop Recording to end the current recording process and generate an
archive, as shown in Figure 2-14. When the generated file is played at an endpoint, you can only see the file
saved as a raw code stream. However, when it is played by request from a web page, you will find that it is saved
as a WMV file.
Figure 2-14 Stop Recording
20