Download
Share
Print this page
Polycom RSS 2000 Getting Started Manual
  1. Manuals
  2. Brands
  3. Polycom Manuals
  4. Server
  5. RSS 2000
  6. Getting started manual
Polycom RSS 2000 Getting Started Manual

Polycom RSS 2000 Getting Started Manual

V3.0.0.000
Hide thumbs Also See for RSS 2000:

Advertisement

Quick Links

Download this manual See also: User Manual, Getting Started Manual
Polycom ™ RSS 2000 V3.0.0.000
Getting Started Guide

General Safety Precautions

Follow these rules to ensure general safety:
• Keep the area around the Polycom RSS 2000 unit clean, free of clutter
and well ventilated.
• Decide on a suitable location for the equipment rack that will hold
the RSS 2000 unit and is near a grounded power outlet.
• • Use a regulating uninterruptible power supply (UPS) to protect the
RSS 2000 unit from power surges and voltage spikes, and to keep it
operating in case of a power failure.
Hardware Specification
Pentium 4, 2.8Mhz,2G RAM,250G Hardisk.
• Form Factor: 1U 19" rack mount
• Height: 1.73" (44 mm)
• Width: 16.83" (430 mm)
• Depth: 15.35" (390 mm)
• Gross Weight: 22.4 lbs (10.2 kg)
• Power Supply: Thermal controlled 220W
ATX AC power supply w/PFC
• AC Voltage: 100 - 240 VAC, 60-50 Hz, 5-3
Amps
XP OS
DOC2207A RSS 2000 V3.0 Getting Started guide - Release Note - Final - February 26, 2008.doc

Advertisement

loading
Need help?

Need help?

Do you have a question about the RSS 2000 and is the answer not in the manual?

Questions and answers

Related Manuals for Polycom RSS 2000

Summary of Contents for Polycom RSS 2000

  • Page 1: General Safety Precautions

    • Power Supply: Thermal controlled 220W ATX AC power supply w/PFC • AC Voltage: 100 - 240 VAC, 60-50 Hz, 5-3 Amps XP OS DOC2207A RSS 2000 V3.0 Getting Started guide - Release Note - Final - February 26, 2008.doc...

  • Page 2: Unpacking And Installing The Rss 2000

    Power cable into the power source socket. 3 Connect the lan cable to LAN1 in the back of the system. 4 Turn on the power switch. DOC2207A RSS 2000 V3.0 Getting Started guide - Release Note - Final - February 26, 2008.doc...

  • Page 3: Initial Rss 2000 Ip Configuration

    Connect a cross over lan cable to LAN1 in the RSS 2000. Set your laptop to the same segment of the RSS a. For example (in your laptop IP config setting): DOC2207A RSS 2000 V3.0 Getting Started guide - Release Note - Final - February 26, 2008.doc...
  • Page 4 Go to system configuration->IP setting and modify the IP address , you can set a static IP or chose DHCP . Click the save button and than reset the system. DOC2207A RSS 2000 V3.0 Getting Started guide - Release Note - Final - February 26, 2008.doc...
  • Page 5 2.Changing the initial IP address via an RS232 Console or Telnet Another option to modify the IP address of the RSS 2000 is using the RS232 console. 1.Connect to the RS232 port – and activate the console (9600, 8bits) Login: polycom (or any administrator password) When login to the console, you will see the current IP address of the system.
  • Page 6 Clustering How many RSS can be stacked to support ? DOC2207A RSS 2000 V3.0 Getting Started guide - Release Note - Final - February 26, 2008.doc Maximum Capacity 2 conference or 2 EPs dialing in the same time1 H239 recorded link at a time...
  • Page 7 TCP port 554. As seen in Figure 2, unchecking RTSP/UDP removes the user’s ability to specify a port range and forces all connections to use TCP 554 only. DOC2207A RSS 2000 V3.0 Getting Started guide - Release Note - Final - February 26, 2008.doc Type...
  • Page 8 Figure-1 DOC2207A RSS 2000 V3.0 Getting Started guide - Release Note - Final - February 26, 2008.doc...
  • Page 9 Figure-2 DOC2207A RSS 2000 V3.0 Getting Started guide - Release Note - Final - February 26, 2008.doc...
  • Page 10 Log into RSS and go to Product Activation Click Polycom Resource Center , go to the PRC and under product activation: DOC2207A RSS 2000 V3.0 Getting Started guide - Release Note - Final - February 26, 2008.doc Description Option Activation (Basic, Multicast, Clustering)
  • Page 11 The user will receive a K Keycode with his options (Either none, Clustering or Multicast) After entering the K Keycode – the user will need to go back to the PRC and receive now a U Keycode: DOC2207A RSS 2000 V3.0 Getting Started guide - Release Note - Final - February 26, 2008.doc...
  • Page 12 U-Key code (As taken from the product activation section on the RSS 2000 Web UI): After entering both the K Keycode and the U keycode the product will be ready to be used: DOC2207A RSS 2000 V3.0 Getting Started guide - Release Note - Final - February 26, 2008.doc...
  • Page 13 Before upgrade , Please check your current version , we have different process for v1.0 and v2.0 upgrade. Keep your RSS2000 powered on and connected to the network during the upgrade. DOC2207A RSS 2000 V3.0 Getting Started guide - Release Note - Final - February 26, 2008.doc Description With full function –support English and Japanese...
  • Page 14 Paste your K-Keycode , click save . Notes : No need to restart . 3: Check the status Go to “ . - System information > Product Information” page DOC2207A RSS 2000 V3.0 Getting Started guide - Release Note - Final - February 26, 2008.doc...
  • Page 15 For additional language options installation, please refer to the part in this documentation “Additional Language support “. DOC2207A RSS 2000 V3.0 Getting Started guide - Release Note - Final - February 26, 2008.doc...
  • Page 16 Paste your U-Keycode , click save . Notes : No need to restart . 3: Check the status Go to “ . - System information > Product Information” page DOC2207A RSS 2000 V3.0 Getting Started guide - Release Note - Final - February 26, 2008.doc...
  • Page 17 For additional language options installation, please refer to the part in this documentation “Additional Language support “. DOC2207A RSS 2000 V3.0 Getting Started guide - Release Note - Final - February 26, 2008.doc...
  • Page 18 2: You will see a command prompt window after the command is executed. The window should look like below. 3: Enter the password for your RSS2000. Default password is polycom , then a system welcome screen appears. DOC2207A RSS 2000 V3.0 Getting Started guide - Release Note - Final - February 26, 2008.doc...
  • Page 19 Log in to RSS , go to “ . - System Configuration > Upgrade/Reset System” page . Download the “RSS2000.3.0.0.0_part2_addtional languages . pkg” Restart DOC2207A RSS 2000 V3.0 Getting Started guide - Release Note - Final - February 26, 2008.doc (without quotation marks) unknown version ,...
  • Page 20 RSS-234 Email notification for NAT Topology DOC2207A RSS 2000 V3.0 Getting Started guide - Release Note - Final - February 26, 2008.doc Description RSS2000 should support active a recording task in next server when the recording capacity in last one is full .
  • Page 21 Archive Converter When using the RSS2000ArchiveConverter – the transcoded file loaded back to the RSS will be limited to 20 FPS DOC2207A RSS 2000 V3.0 Getting Started guide - Release Note - Final - February 26, 2008.doc Description...
  • Page 22 Limitation is that if uses don’t refresh the page , the percentage will not have any update DOC2207A RSS 2000 V3.0 Getting Started guide - Release Note - Final - February 26, 2008.doc Description...
  • Page 23 When recording a multipoint on a VSX – first connect the endpoint to the VSX and only than connect to the RSS 2000 Sony HG90 can connect in HD only. The RSS 2000 menu is in CIF (Not in HD) as so the HG 90 will connect as secondary.
  • Page 24 DOC2207A RSS 2000 V3.0 Getting Started guide - Release Note - Final - February 26, 2008.doc When working with the MGC in Video switching mode – the RSS will indicate HD You can disable HD or define the minimum rate for HD in the single point recording setting in the RSS V2.0...