Polycom RSS 2000 User Manual page 9

Help Information
After you log in to the system, in the prompt line (#), type ? or Help.
# ?
Available comands:
show
reset password
set lan1 static <ip address> netmask <ip mask> [gw <gateway address>]
reboot
help or ?
quit
#
Exit
To log off the system, in the prompt line (#), type quit and then press Enter.
# quit
User logout ok.
Please input your password:
System Reset
To reboot the system, in the prompt line (#), type Reboot and press Enter. the system will reset automatically.
# reboot
System is restarting now.... # .................................................
Change Login Password
You can reset your password to the default password (Polycom). To reset password, in the prompt line (#), type
Reset Password and press Enter.
# reset password
Password has been successfully reset.
Available commands:
show
reset password
set lan1 static <ip address> netmask <ip mask> [gw <gateway address>]
reboot
help or ?
quit
#
Show system information.
Reset the administrator's password to default.
Config LAN1 IP address.
Restart system.
Show this message.
Logout.
Show system information.
Reset the administrator's password to default.
Config LAN1 IP address.
Restart system.
Show this message.
Logout.
Polycom RSS 2000 User's Guide
7