Lowrance LCX-112C Operation Instructions Manual page 172

Overlay Data Shown, with bearing selected (left). Press ENT to access
option (right). Press ENT again to remove item and return to
R
EMOVE
To move overlaid data:
You may find it useful to rearrange data floating in your display
window.
1. Press
MENU
2. You'll see a list of the overlay data currently displayed. Select the
item you want to move and press
3. The data begins to flash on your screen. Use any combination of
, ↑ and ↓ to move the data to a new location.
←
4. When satisfied, press
NOTE:
The Customize command and the Overlay Data command use the same
information categories. The difference between the two commands is the
Customize command is only used to modify pages with digital data
boxes, while Overlay Data changes information floating on the screen.
See Customize Page Displays, on page 68 for information on
customizing data boxes.
To change displayed data font size:
1. From the Map or Sonar page, press
2. Press ↓ or ↑ to select Data Type|press → or ← to Data Size|
The selected data type will be displayed in the new size. (To change the font
size of another data type repeat these steps, beginning with step two above.)
3. To return to the previous page, press
the Overlay Data Shown screen.
|↓ to
O
VERLAY
EXIT
| .
D ENT
ATA
|→ to
ENT
|
EXIT.
MENU
EXIT
162
| .
M ENT
OVE
| to
↓
O
VERLAY
.
→
| .
D ENT
ATA
EXIT
,
.