If you select yes, there are two options: A. You can spell out the city
name in the top selection box. Press ↑ or ↓ to change the first letter,
then press → to move the cursor to the next letter and repeat until the
name is correct, then press
selection list by pressing
from the list and press
city field.
NOTE:
We recommend you do not enter a city name unless the list is too
long to search through. The unit can search more quickly when you
don't enter a city name.
Find city field (left); search in particular city only option (center); Find
When the necessary search fields are filled in, press ↓ to
6.
Your unit asks you to wait while it searches for the address (If an address is
not in the database, a message appears saying the address could not be
found.).
7. The unit will display a list of addresses. If the address you are looking for
is highlighted at the top of the list, press
correct address from the list, then press
the location selected by the cursor (In the example below, there were two
addresses found, but we are looking for 12303 East 11th Street, not 11th
Court, so we had to scroll down the list to select the correct address.).
Address search result list (left); Address page options, Find or Go To
(center). After the address is located, you can navigate to it (right).
8. To navigate to the address, press
begin showing navigation information to the address pointed out by the
|
ENT
ENT.
, then press ↓ or ↑ to select a city name
ENT
The city name you selected is now in the
ENT.
City by name (right).
ENT
177
B. Or jump down to the lower
. If not, use ↓ and ↑ to select the
ENT
. The Map Page will appear with
|→|
ENT
ENT
F
A
IND
DDRESS
and your unit will
|
ENT.