Table of Contents
Advertisement
Start outdoors, with a clear view of the open sky. As you practice, try
navigating to a location at least a few blocks away. While you're learning,
navigation in too small an area will constantly trigger arrival alarms.
1. Connect the unit to electric power and the antenna module. Make sure the
MMC is in. (See complete installation details beginning on page 9.)
2. To turn on the unit, press and release
3. Opening screen displays map of North America at the 4,000-mile zoom
range. Rotate through the four main Page screens (Map Page, Satellite Status
Page, Navigation Page and Sonar Page) by pressing
Page Name|
EXIT
4. Wait while unit locates satellites and calculates its current position. Process
is visible on Satellite Page. This takes an average of 1 minute or less under an
unobstructed sky. When the unit acquires position, a tone sounds and a
position acquired message appears.
5. With position acquired, press the
which shows a bird's eye view of earth. Move around the map by:
Zoom in closer to see more detail: press
Zoom out to see more area, less detail: press
Scroll map north, south, east or west using arrow keys ↑ ↓ → ←.
To stop scrolling and return to current position on map, press
6. Set a waypoint (Wpt 001) at your current position: press
Waypoint symbol and "001" appears.
7. Zoom/scroll the map to find a nearby object or location to visit. Use arrow
keys to center cursor cross-hair over the map object or location.
8. Navigate to the selected destination: press
line on Map Page or compass bearing arrow on Navigation Page.
9. At destination, Arrival Alarm goes off; to clear it, press
navigation: press
10. Return to Wpt 1 by Navigate To Waypoint or Backtrack Trail. To
Waypoint: press
001, press
ENT
to
|
M
T
ENT
Y
RAILS
|→ to
N
AVIGATE
will appear asking if you want to be prompted or directed to intermediate
waypoints along the trail. Use → ← to make your selection, then press
11. Back home, Arrival Alarm goes off; press
|
|↓ to
MENU
MENU
12. To turn off the unit, press and hold
GPS Quick Reference
. Switch Pages to display Satellite Status Page.
|
MENU
MENU
|→ to
WPT
|
; follow navigation displays. Trail: press
ENT
. Press ↓ to Trail 1|
|
|← to
R
ENT
EVERSE
C
N
ANCEL
AVIGATION
PWR
PAGES
ZIN
|↓ to
C
N
ANCEL
|
|
S
ENT
ENT
AVED
ENT
|
N
ENT
AVIGATE
|
|
← to Y
ENT
key for three seconds.
PWR
111
key.
PAGES
key to display the Map Page,
(zoom in key.)
(zoom out key.)
ZOUT
|
. Follow the course
MENU
ENT
|
|
ENT
AVIGATION
. Use ↑ or ↓ to select Wpt
|
ENT
|→|↓ to
N
. A navigation option window
. Cancel navigation: press
EXIT
|
.
ENT
ES
|← or → to select
key.
EXIT
|
WPT
WPT
. Cancel
EXIT
|
.
← to Y
ENT
ES
|
MENU
MENU
|
|↓ to
ENT
AVIGATE
ENT
.
|↓
.
Hide quick links:
Advertisement
Table of Contents
