7. Highlight
S
Press
repeatedly to get back to the main display.
EXIT
NOTE:
To turn off (uncheck) an alarm, highlight its
.
ENTER
Waypoint Sharing
Waypoint Sharing allows you to share a waypoint from one display unit
with display units across the network.
To turn on/off Waypoint Sharing
1. Press
MENU
2. Highlight
W
waypoint sharing.
3. Press
repeatedly to get return to the main display.
EXIT
Backlight Synchronization
The Backlight Synchronization command will keep all display unit
backlight levels consistent across the NMEA 2000 network. So, if you
set the backlight level to 75% on one display unit, all other units on the
network will automatically switch to the same setting.
To turn on/off Backlight Synchronization:
1. Press
MENU
2. Highlight
B
on/off Backlight Synchronization.
3. Press
repeatedly to get back to the main display.
EXIT
Configuring EP Sensors
All configurable devices are configured through their Device Configuration
menus, which may be accessed through the network devices list on the Bus
Configuration menu.
EP-35 Temperature Configuration
To input Device Name:
1. Press
MENU
NMEA 2000 menu will appear with five options: Bus Setup, Fuel
Management, NMEA 2000 Alarms, Waypoint Sharing and Backlight
Synchronization.
2. Highlight
B
US
menu. A list of network devices will be at the top of the page.
3. Select the temp sensor you want to rename and press
Device Configuration menu will appear with the Device Name dialog
box highlighted.
C
ET
ONFIGURATION
|
, select
MENU
S
AYPOINT
HARING
|
, select
MENU
S
ACKLIGHT
YNCHRONIZATION
, use ↑ ↓ to select
|
MENU
and press
S
ETUP
and press
ENT
:
and press
NMEA 2000
and press
and press
NMEA 2000
and press
NMEA 2000
, which will open the Bus Configuration
ENT
194
to finalize alarm settings.
E
NABLED BOX
.
ENT
which will turn on/off
ENT
.
ENT
, which will turn
ENT
and press
and press
. The
ENT
. The
ENT