Map Boundaries; Fill Water With White; Trackline Extension; Presentation Mode - Lowrance LCX-112C Operation Instructions Manual

Map Boundaries:

Press ↓ and → to
press to check it (turn on) or uncheck it (turn off). After the option
ENT
is set, press
EXIT

Fill Water With White:

Press ↓ and → to
press to check it (turn on) and uncheck it (turn off). After the
ENT
option is set, press

Trackline Extension:

Trackline Extension is a tracking option that provides a visual
interpretation of your velocity. To set trackline extension: Press
T E
RACKLINE XTENSION
and press
ENT.

Presentation Mode:

Presentation Mode gives you some control over the map layout by allowing
you to choose between US and International Modes
Mode you must first select the Navionics option from the Map Dataset
Choice menu. Press → to Map Dataset Choice and press
to select Navionics, then press
Use the ↑ ↓ keys to select the desired mode, then press
|
M ENT.
ODE
| |
ENT EXIT EXIT

Safety Contour:

The Safety Contour command allows you to modify depth contours on a
Navionics map for water less than 10 meters deep. To access the Safety
Contour window you must first select the option from the Map Dataset
Choice menu. Press → to Map Dataset Choice and press
keys to select Navionics, then press
|
C ENT.
ONTOUR

Map Overlays (Range Rings; Lat/Long Grid):

The map screen can be customized with four range rings and/or grids
that divide the plotter into equal segments of latitude and longitude.
Range rings are handy for visually estimating distances on the map.
The ring diameters are based on the current zoom range. For example:
at the 100-mile zoom, the screen will show two rings with your current
position in the center. The large ring touching the left and right sides of
the screen is 100 miles in diameter (same as the zoom range). The
second smaller ring is 50 miles in diameter (always 1/2 the zoom
range).
D M
RAW AP
| to return to the page display.
EXIT
F W
ILL ATER
|
EXIT EXIT
| Use the
ENT.
to return to the page display.
Use to choose the desired depth and press
↑ ↓
. With the option highlighted,
B
OUNDARIES
. With the option highlighted,
W W
ITH HITE
to return to the page display.
keys to select the desired distance setting
↑ ↓
. Press
ENT
151
To access Presentation
.
ENT
and to
↓ →
. Press ↓ to
ENT
to
↓
. Use ↑ ↓ keys
P
RESENTATION
. Use ↑ ↓
ENT
S
AFETY
ENT.