Engine Trim Calibration; Reset Trim Calibration; Bennett Trim Tabs Calibration; To Calibrate Trim Tabs - Lowrance LCX-112C Operation Instructions Manual

appear: Are you sure you wish to Fill Tank? Select
14. The following message will appear: Do you wish to re-calibrate the
device? Select
15. Repeat these steps for each engine interface you want to calibrate.

Engine Trim Calibration

Engine Trim is calibrated through the Suzuki Engine Interface Device
Configuration menu.
1. Press
MENU
2. Choose
B
US
Interface connected to the desired engine and press
3. Highlight
window will appear with a list of Calibration Instructions.
4. Highlight
S
will appear: Please fully raise the Engine Trim.
5. After engine trim has been fully raised, press
message will appear: Please fully lower the Engine trim.
6. After engine trim has been fully lowered, press
Completed message will appear. Press
7. Repeat these instructions to adjust the engine trim for each engine
connected to a Suzuki Engine Interface. Press
to the main display.

Reset Trim Calibration

If you are not satisfied with your engine trim calibration, you can reset
engine trim calibration from the Suzuki Engine Interface Advanced
Options menu.
1. Press
MENU
2. Choose
B
US
connected to the desired engine and press
3. Highlight
and press
C
ALIBRATION
wish to re-calibrate the device?
4. Highlight
Y
main display.

Bennett Trim Tabs Calibration

Trim Tabs will be calibrated through their Device Configuration menu.

To calibrate Trim Tabs:

1. Press
MENU
devices will appear.
2. Select
B
ENNETT
the Trim Tab Device Configuration menu.
and press
Y
ES
| , select
MENU
and press
S
ETUP
C T
ALIBRATE RIM
C
TART ALIBRATION
| , select
MENU
and press
S
ETUP
A O
DVANCED PTIONS
. The following message will appear: Do you
ENT
and press
ENT
ES
| , select
MENU
from the list and press
T T
RIM ABS
.
ENT
and press
NMEA 2000
. Select the Suzuki Engine
ENTER
and press
ENT
and press
ENT
and press
NMEA 2000
. Select the Suzuki Engine Interface
ENT
and press
. Press
EXIT
and press
B S
US ETUP
208
and press
Y
ES
.
ENT
.
ENT
. The Device Calibration
. The following message
ENT
ENT
ENT
.
repeatedly to return
EXIT
.
ENT
.
ENT
. Select Reset
ENT
repeatedly to get back to the
. A list of network
ENT
, which will open
ENT
.
ENT
. The following
. A Calibration
T
RIM