Show Waas Alarm - Lowrance LCX-112C Operation Instructions Manual

Press and | Press ↑ or ↓ to select the
↓ → to Y
To set the Year: ENT.
EAR
year, then press
ENT.
You also may switch the Time Format between 12 and 24-hour options. The
Date Format also may be modified between three options: Month/Day/Year,
Day/Month/Year and Year/Month/Day.
Time Settings Menu.
button is at the bottom left of the menu. This feature allows
C DST
ONFIG
your unit to automatically adjust with the time change caused by Daylight
Saving Time. It should only have to be set once. You may select which set
of rules matches DST in your region or simply accept the default.
Once you have each field set the way you want, press repeatedly to
EXIT
return to the previous page.

Show WAAS Alarm

When the signal is available, your unit will automatically use WAAS to
boost the accuracy of the position fix. When the WAAS signal is lost or
acquired, an alarm message appears. Since the U.S. government is still
developing the WAAS system, it's not unusual for a GPS/WAAS receiver
to frequently lose and reacquire its lock on a WAAS satellite. That can
result in the alarm repeatedly going on and off. You have the option of
turning off the WAAS Acquired/Lost alarm without affecting how the
unit uses WAAS. Here's how:
1. Press | | to | | to .
↓ ↓
MENU MENU GPS S ENT S WAAS A
ETUP HOW LARM
2. With the option highlighted, press to uncheck it (turn off) or
ENT
check it (turn on). After the option is set, press | to return to
EXIT EXIT
the page display.
3. You can return to this command and press again to turn on the
ENT
feature.
169