Power/Lights On And Off; Main Menu - Lowrance LCX-112C Operation Instructions Manual

3. MENU – Press this key to show the menus and submenus, which
allow you to select a command or adjust a feature. This also accesses
search functions for streets, intersections, addresses and highway exits.
4. ARROW KEYS – These keys are used to navigate through the
menus, make menu selections, move the map and sonar chart cursors
and enter data.
5. ENT/ICONS (Enter & Icons) – This key allows you to save data,
accept values or execute menu commands. It is also used to create
event marker icons.
6. EXIT – The Exit key lets you return to the previous screen, clear data or
close a menu.
7. WPT – (Waypoint) The Waypoint key is used to save and recall
waypoints, search for waypoints and access the waypoint list. It also
launches the Point-of-Interest (POI) search menus and is involved in
some navigation functions.
8. ZOUT – (Zoom Out) – This key lets you zoom out the map. On the Sonar
Page, this key returns you to a full sonar chart display, showing the entire
water column from surface to bottom. On the Map Page, this lets you see a
larger geographic area on the map. You see less detail zooming out.
9. ZIN – (Zoom In) – This key lets you zoom in on the map. On the Sonar
Page, this key enlarges fish signals and bottom detail. On the Map Page,
zooming in lets you see more detail in a smaller geographic area on the map.

Power/lights on and off

To turn on the unit, press . As the unit powers up, the Map Page is
PWR
|← or → to Page
displayed first (To switch to another page, press
PAGES
Name| .).
EXIT
To turn on the backlight, press again. The unit has three backlight
PWR
levels. Repeatedly pressing will cycle through the backlight settings
PWR
and turn off the backlight.
Turn off the unit by pressing and holding the key for 3 seconds.
PWR

Main Menu

The unit has a Main Menu, which contains some function commands and
some setup option commands. The tutorial lessons in this section will deal
only with functions and basic commands that make the Unit do something.
The unit will work fine for these lessons right out of the box with the factory
default settings. But, if you want to learn about the various options, see Sec.
8, System Setup and GPS Setup Options.
You can access the Main Menu from any of the four Page screens by
pressing | . To clear the menu screen and return to the page
MENU MENU
display, press .
EXIT
100