Ep-10 Fuel Flow Configuration - Lowrance LCX-112C Operation Instructions Manual

Fish-finding sonar & mapping gps
Table of Contents

Advertisement

To restore default settings
1. Press
MENU| MENU
NMEA 2000 menu will appear with five options: Bus Setup, Fuel
Management, NMEA 2000 Alarms, Waypoint Sharing and Backlight
Synchronization.
2. Highlight
Configuration menu. A list of network devices will be at the top of the
page.
3. Select the desired temp sensor and press
Configuration menu will appear.
4. Highlight
A
5. Select
R
ESTORE
appear: Are you sure you wish to change this device's configuration?
6. Highlight
Y
main display.

EP-10 Fuel Flow Configuration

To input Device Name:
1. Press
MENU| MENU
NMEA 2000 menu will appear with five options: Bus Setup, Fuel
Management, NMEA 2000 Alarms, Waypoint Sharing and Backlight
Synchronization.
2. Highlight
Configuration menu. A list of network devices will be at the top of the
page.
3. Select the fuel flow you want to rename and press
Configuration menu will appear with the Device Name dialog box
highlighted.
4. Press
ENTER
flow. Press
ENT
To select a Location:
1. Press
MENU| MENU
NMEA 2000 menu will appear with five options: Bus Setup, Fuel
Management, NMEA 2000 Alarms, Waypoint Sharing and Backlight
Synchronization.
2. Highlight
B
US
menu. A list of network devices will be at the top of the page.
3. Select the desired fuel flow and press
menu will appear.
4. Select
L
OCATION
with following options: Port, Center, Starboard and Unknown.
:
, use ↑ ↓ to select
and press
B
S
US
ETUP
O
DVANCED
PTIONS
and press
D
EFAULTS
and press
ENT
ES
, use ↑ ↓ to select
and press
B
S
US
ETUP
and use ↑ ↓, ← → to input the desired name for the fuel
. Press
repeatedly to get back to the main display.
EXIT
, use ↑ ↓ to select
and press
S
ETUP
and press
NMEA 2000
, which will open the Bus
ENT
and press
ENT
. The following message will
ENT
. Press
repeatedly to get back to the
EXIT
NMEA 2000
, which will open the Bus
ENT
NMEA 2000
, which will open the Bus Configuration
ENT
ENT
, which will open the Location menu
ENT
196
and press
. The Device
ENT
.
and press
ENT
and press
. The Device Configuration
. The
ENT
. The
ENT
. The Device
. The
ENT

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lcx-113c hdLcx-27cLcx-28c hdLcx-37cLcx-38c hd

Table of Contents