Device Configuration Menu; Device Information And Device Data - Lowrance LCX-112C Operation Instructions Manual

Fish-finding sonar & mapping gps
Table of Contents

Advertisement

8. Repeat Steps 5-7 for each remaining tank.
9. When all tanks have been configured, press the
button. The following confirmation message will appear: Are you sure
you wish to change the bus configuration? Choose
Press
to get back to the main display.
EXIT

Device Configuration Menu

When a device is selected from the network devices list on the Bus
Configuration menu, its Device Configuration menu will appear. Device
configuration menus vary among devices. Available functions on device
configuration menus allow you to change device names, tank sizes, fluid
types and provide access to the Advanced Options menu. We will cover
configuration and calibration later in this section.

Device Information and Device Data

The Device information panel, located to the left of the Device Configuration
menu, displays information on the selected device that includes, software
version, model, address, serial number, instance and current status.
If you do not have an EP-15 Fluid Level, EP-10 Fuel Flow or EP-20
Engine Interface on the network, the Bus Configuration menu will not
display the Engine-Tank Configuration menu, Tank Select menu, Tank
Device Data is shown in the Device Data window at the bottom of the device
configuration menu. The information displayed in the Device Data window
will vary among devices. If, for example, you are viewing the device
configuration menu for an EP-15 Fluid Level, the device data window will
include tank size and the amount of fuel left in the tank. The Device Data for
an EP-10 Fuel Flow includes Fuel Rate (amount of fuel burned per hour), Fuel
Used, Trip Fuel Used and Seasonal Fuel Used.
NOTE:
If, as in the graphic above, you do not have a Suzuki Engine Interface, EP-
15 Fluid Level or EP-10 Fuel Flow on the network, the Engine &
Configuration menu, Tank Select menu, Tank Size dialog and Set
Configuration button will not be displayed on the Bus Configuration menu.
Size menu or Set Configuration button.
190
S
C
ET
ONFIGURATION
and press
Y
ES
,
ENT

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lcx-113c hdLcx-27cLcx-28c hdLcx-37cLcx-38c hd

Table of Contents